Tritium Tube
Tritium tube is glass shell, fragile, especially the ends of the tritium tube is relatively weak, do not squeeze when installing, after receiving the goods, please be sure to confirm whether the normal light-emitting and then installed, if the installation and then reflect the tritium tube does not glow, we default is your own reasons for damage to the tritium tube, we will not do any after-sales processing.
Tritium tube is a weak light source, to be seen in a dark environment to light, do not need any external energy, tritium half-life is 12.3 years, theoretically, can be bright close to 25 years, but after 12.3 years half-life brightness is now half.


Installation Method
1. Apply a small amount of shadowless UV adhesive to the bottom of the slot where the tritium tube is to be installed, and then place the tritium tube into the slot of the product. If the position is not quite accurate, use a toothpick to gently flick the tritium tube until it is in the desired position, then apply a small amount of adhesive to the surface, which will serve to protect the tritium tube.
2. Wipe off the excess glue and irradiate with a violet light for about 10 minutes to allow the glue to cure. The violet light irradiation time is related to the amount of glue used. If you want to remove the tritium tubes after curing, you will need to use a glue remover.